公刊論文
1. S. Hisada, S. Minakuchi, K. Takagaki and N. Takeda, "High-Performance T-joint Using Asymmetric Stacking Sequence and Atypical Deltoid Structure", SAMPE Journal, Vol. 54, No. 2, March/April 2018, pp. 6-15.

2. K. Takagaki, S. Minakuchi and N. Takeda, "Process-Induced Strain and Distortion in Curved Composites. Part I: Development of Fiber-Optic Strain Monitoring Technique and Analytical Methods", Composites Part A, Vol. 103, 2017, pp. 236-251. https://doi.org/10.1016/j.compositesa.2017.09.020.

3. K. Takagaki, S. Minakuchi and N. Takeda, " Process-Induced Strain and Distortion in Curved Composites. Part II: Parametric study and application", Composites Part A, Vol. 103, 2017, pp. 219-229. https://doi.org/10.1016/j.compositesa.2017.09.019.

4. K. Takagaki, S. Hisada, S. Minakuchi and N. Takeda, "Process Improvement for Out-of-Autoclave Prepreg Curing Supported by In-Situ Srain Monitoring", Journal of Composite Materials, Vol. 51, No.9, 2017, pp.1225-1237, DOI: 10.1177/0021998316672001.

5. T. Tsukada, S. Takeda, S. Minakuchi, Y. Iwahori and N. Takeda, "Evaluation of the Influence of Cooling Rate on Residual Strain Development in Unidirectional Carbn Fibre/Polyphenylenesulfide Laminates Using E bedded Fibre Bragg Grating Sensors", Journal of Comosite Materials, Vol. 51, No. 13, 2017, pp.1849-1859, DOI: 10.1177/0021998316662327.

6. S. Minakuchi, S. Niwa, K. Takagaki and N. Takeda, "Composites Cure Simulatin Scheme Fully Integrating Internal Strain Measurement", Composites: Part A, Vol. 84, 2016, pp. 53-63, http://dx.doi.org/10.1016/j.compositesa.20016.01.001.

7. J. T. Siivola, S. Minakuchi, T. Mizutani and N. Takeda, "Evaluation of Damage Detectability in Practical Sandwich Structure Application Conditions Using Distributed Fiber Optic Sensor", Structural Health Monitoring, Vol. 15, No. 1, 2016, pp. 3-20, doi:10.1177/1475921715620002.

8. J. T. Siivola, S. Minakuchi and N. Takeda, "Unloading Response Prediction of Indentaion Loaded Foam Core Sandwich Structures Using Extended Foam Material Model with Tensile Hardening", Composites Part B, Vol. 84, August 2015, pp. 71-82, http://dx.doi.org/10.1016/j.compositesb.2015.08.078.

9. S. Minakuchi, T. Sanada, N. Takeda, S. Mitani, T. Mizutani, Y. Sasaki and K. Shinozaki, "Thermall Strain in Lightweight Composite Fiber-Optic Gyroscope for Space Application", Journal of Lightwave Technology, Vol. 33, No. 12, June 2015, pp. 2658-2662.

10. 丹羽翔麻, 高垣和規, 水口周, 武田展雄, "層間樹脂層を有するCFRP積層版の成形時硬化収縮モニタリングおよび成形解析", 日本複合材料学会誌, No. 41, Vol. 5, 2015, pp. 168-175.

11. N. Sakurayama, S. Minakuchi and N. Takeda, "Sensing and Healing of Disbond in Composite Stiffened Panel Using Hierarchical System", Composite Structures, Vol. 132, No. 15, November 2015, pp. 833-841, http://doi.org/10.1016/j.compstruct.2015.06.074.

12. K. Takagaki, S. Minakuchi and N. Takeda, "Thick-Walled Crack-Free CFRP Pipes: Stress Reduction Using Atypical Lay-Up", Composite Structures Vol. 126, 2015, pp. 337-346, http://dx.doi.org/10.1016/j.compstruct.2015.02.060.

13. J. T. Siivola, S. Minakuchi and N. Takeda, "Effect of Temperature and Humidity Conditions on Polymethacrylimide(PMI) Foam Core Material and Indentation Response of its Sandwich Structures", Journal of Sandwich Structures and Materials, July 2015, Vol. 17, No. 4 pp. 335-358, DOI: 10.1177/1099636215570831.

14. S. Minakuchi, K. Uhira, Y. Terada, N. Takeda, N. Saito and T. Shimizu, "Quality Contril of Composite Bonded Joints Using Fiber-Optic-Based Process Monitoring", SAMPE Journal, Vol. 51. No. 1, January/Feabureay, 2015, pp. 44-54.

15. T. Kundu, X. Yang, H. Nakatani and N. Takeda, "A Two-Step Hybird Technique for Accurately Localizing Acoustic Source in Anisotropic Structures without Knowing Their Material Properties", Ultrasonics, Vol. 56, 2015, pp. 271-278, http//dx.doin.org/10.1016/j.ultras.2014.08.009.

16. T. Tsuda, T. Ogasawara, S-Y Moon, K. Nakamoto, N. Takeda, Y. Shimamura and Y. Inoue, "Stress Transper Efficiency in Aligned Multi-Wall Carbon Ananotubes Sheet/Epoxy Composites", Composites Part A, Vol. 67, July 2014, pp. 16-21, http://dx.doi.org/10.1016/j.compositesa.2014.07.004.

17. S. Minakuchi, D. Sun and N. Takeda, Hierarchical System for Autonomous Sensing-Healing of Delamination in Large-Scale Composite Structures", Smart Materials and Structures Vol. 23, No.11, 2014, 10pp, doi:10.1088/0964-1726/23/11/115014.

18. 津田皓正, 仲本兼悟, 小笠原俊夫, 文淑英, 武田展雄, 小川武史, 島村佳伸, 井上翼, "配向カーボンナノチューブ/エポキシ複合材料の力学特性に及ぼすプリプレグへの予ひずみ付与の影響", 日本複合材料学会誌, Vol. 40, No. 5, 2014, pp. 209-217.

19. T. Nadabe and N. Takeda, "Computer Simulation of Fracture Process in Compressive Failure of Cross-Ply Laminate of Composite Materials", Applied Mechanics and Materials Vol. 660, 2014, pp. 549-556, doi: 10.4028/www.scientific.net/AMM.660.549.

20. T. Tsuda, T. Ogasawara, S-Y Moon, K. Nakamoto, N. Takeda, Y. Shimamura, and Y. Inoue, "Three Dimensional Orientation Angle Distribution Counting and Calculation for the Mechanical Properties of Aligned Carbon Nanotube/Epoxy Composites, Composites: Part A, Vol. 65, 2014, pp.1-9, http://dx.doi.org/10.1016/j.compositesa.2014.05.009.

21. Y. Ito, t. Obo, S. Minakuchi and N. Takeda, "Cure Strain in Thick CFRP Laminate: Optical-Fiber-Based Distributed Measurement and Numerical Simulation", Advanced Composite Materials, Vol. 24, No.4, pp. 325-342, DOI: 10.1080/09243046.2014.906914.

22. H. Nakatani, T, Kundu and N. Takeda, "Improving Accuracy of Acoustic Source Localization in Anisotropic Plates", Ultrasonics, Vol. 54, 2014, pp. 1776-1788, http//dx.doin.org/10.1016/j.ultras.2014.03.001.

23. C. Haynes, M. Todd, T. Nadabe, and N. Takeda, "Monitoring of Bearing Failure in Composite Bolted Connections Using Ultrasonic Guided Waves: A Parametric Study", Structural Health Monitoring, An International Journal, Vol. 13, No. 1, 2014, pp. 94-105.

24. N. Takeda, S. Minakuchi and T. Nadabe, "Distributed Strain Monitoring for Damage Evolution in CFRP Bolted Structures with Embedded Optical Fibers", Key Engineering Materials, Vol. 558, 2013, pp. 252-259.

25. K. Takagaki, S. Minakuchi and N. Takeda, "Fiber-Optic-Based Life-Cycle Monitoring of Through-Thickness Strain in Thick CFRP Pipes", Advanced Composite Materials, 2013, pp. 195-209, DOI:10.1080/09243046.2013.844901.

26. H. Nakatani, T. Hajzargarabashi, K. Ito, T. Kundu and N. Takeda, "Locationg Point of Impact on an Anisotropic Cylindrical Surface using Acoustic Beamforming Technique", Key Engneering Materials, Vol. 558, 2013, pp. 331-340.

27. C. Haynes, T. Nadabe, N. Takeda and M. Todd, "Scattering Matrix Approach to Informing Damage Monitoring and Prognosis in Composite Bolted Connections", Key Engineering Materials, Vol. 558, 2013, pp. 314-322.

28. 高垣和規, 水口周, 武田展雄, "肉厚CFRPパイプ板厚方向ひずみの光ファイバライフサイクルモニタリング", 日本複合材料学会誌, Vol. 39, No. 4, 2013, PP. 143-151.

29. S. Minakuchi, T. Umehara, K. Takagaki, Y. Ito and N. Takeda, "Life Cycle Monitoring and Advanced Quality Assurance of L-Shaped Composite Corner Part Using Embedded Fiber-Optic Sensor", Composites Part A, Vol. 48, 2013, pp. 153-161.

30. S. Minakuchi, T. Uezono, N. Takeda, "Formation and Relaxation of Residual Facesheet Dent on Foam-core Sandwich Structures by Localized Transverse Loading", Journal of Sandwich Structures and Materials, Vol. 15, No. 1, 2013, pp. 71-91.

31. S. Minakuchi, H. Banshoya, S. Ii and N. Takeda, "Hierarchical Fiber-optic Delamination Detection System for Carbon Fiber Reinforced Plastic Structures", Smart Materials and Structures, Vol. 21, No. 10, 2012, 105008(8pp) doi: 10.10 88/0964-1726/21/10/105008.

32. 高橋市弥, 伊藤悠策, 矢代茂樹, 高坪純治, 武田真一, 岩堀豊, 岡部洋二, 武田展雄, "CFRP損傷のためのパルスレーザー励気弾性波伝搬特性評価", 実験力学, Vol. 12, No. 3, 2012, pp. 76-82.

33. Y. Ito, S. Minakuchi, T. Mizutani and N. Takeda, "Cure Monitoring of Carbon-Epoxy Composites by Optical Fiber-Based Distributed Strain-Temperature Sensing System", Advanced Composite Materials, Vol. 21, No. 3, 2012, pp. 259-271.

34. 高橋市弥, 伊藤悠策, 矢代茂樹, 武田真一, 岩堀豊, 高坪純治, 岡部洋二, 武田展雄, "レーザー励起弾性波可視化手法を用いたCFRPスカーフ補修構造の損傷検出", 日本複合材料学会誌, Vol. 38, No.6, 2012, pp. 33-41.

35. 中谷隼人, 上野拓也, 荻原慎二, 武田展雄, 青木雄一郎, 武田真一, 永尾陽典, "切欠きを有するノンクリンプ織物VaRTM複合材の引張特性", 材料, Vol. 61, No. 7, 2012, pp. 642-647.

36. S. Minakuchi, I. Yamauchi, N. Takeda and Y. Hirose, "Memorizing and Detecting an Arrested Crack in a Foam-Core Sandwich Structure Using Embedded Plastic Materials and Fiober-Opitc Sensors", Smart Materials and Structures, Vol. 21, No. 5, 2012, 055025(8pp) doi:10.1088/0964-1726/21/5/055025.

37. 水口周, 高井元, 大嶽晴佳, 武田展雄, "構造健全性診断技術との融合に向けたCFRP構造の簡易急速補修技術に関する検討ー損傷検知の不確定性の影響評価ー", 材料システム, Vol. 30, 2012, pp. 47-51.

38. K. Kundu, H. Nakatani and N. Takeda, "Acoustic Source Localization in Anisotropic Plates", Ultrasonics, Vol. 52, 2012, pp. 740-746, doi:10/1016/j.ultras. 2012.01.017.

39. 灘部岳晃, 西川雅章, 水口周, 中村達也, 武田展雄, "ひずみ計測によるCFRPボルト接合部の損傷検出のための数値解析", 日本複合材料学会誌, Vol. 38, No. 1, 2012, pp.22-29.

40. M. Nishikawa, K. Watatsuki, A. Yoshimura and N. Takeda, "Effect of Fiber Arrangement on Shape Fixity and Shape Recovery in Thermally Activated Shape Memory Polymer-Based Composites", Composites Part A, 2012, Vol. 43, pp. 165-173.

41. 灘部岳晃, 西川雅章, 水口周, 中村達也, 武田展雄, "CFRPボルト接合部の面圧破壊に影響する繊維キンク損傷のモデリング", 日本複合材料学会誌, Vol. 37, No. 5, 2011, pp.172-181.

42. S. Minakuchi, H. Tsukamoto, H. Banshoya and N. Takeda, "Hierarchical Fiber-Optic-Based Sensing System: Impact Damage Monitoring of Large-Scale CFRP Structures", Smart Materials and Structures, Vol. 20, 2011, Paper No. 085029.

43. I. Takahashi, K. Sekine, H. Takeya, Y. Iwahori, N. Takeda and Y. Koshioka, "Life Cycle Structural Health Monitoring of Airframe Structures: Strain Mapping Using FBG Sensors", SAMPE Journal, Vol. 47, No. 6, 2011, pp. 6-15.

44. 水口周, 水谷忠均, 秋野望, 武田展雄, 筒井寛明, 平野憲芳, 木元順一, 越岡康弘, "多重化FBG光ファイバセンサの動ひずみ計測によるCFRPフォームコアサンドイッチ構造の衝撃同定", 日本航空宇宙学会論文集, Vol. 59, No. 691, 2011, pp. 212-221.

45. 水口周, 中村達也, 灘部岳晃, 西川雅章, 武田展雄, 岸眞人, 保立和夫, "埋め込み光ファイバの分布型BOCDAによるCFRPボルト接合部の損傷検知", 日本航空宇宙学会論文集, Vol. 59, No. 690, 2011, pp. 176-182.

46. S. Minakuchi, I. Yamauchi, N. Takeda and Y. Hirose, "Detecting an Arrested Crack in a Foam-Core Sandwich Structure Using an Optical Fiber Sensor Embedded in a Crack Arrester", Advanced Composite Materials, Vol. 20, 2011, pp. 419-433.

47. T. Tsuda, T. Ogasawara, F. Deng and N. Takeda, "Direct Measurements of Interfacial Shear Strength of Multi-Walled Carbon Nanotube/PEEK Composite Using a Nano-Pullout Method", Composites Science and Technology, Vol. 71, 2011, pp. 1295-1300.

48. S. Minakuchi, N. Takeda, S. Takeda, Y. Nagao, A. Franceschetti and X. Liu, "Life Cycle Monitoring of Large-Scale CFRP VARTM Structure by Fiber-Optic-Based Distributed Sensing", Composites Part A, Vol. 42, 2011, pp. 669-676.

49. T. Ogasawara, T. Tsuda and N. Takeda, "Stress-Strain Behavior of Multi-Walled Carbon Nanotube/PEEK Composites", Composites Science and Technology, Vol 71, 2011, pp. 73-78.

50. M. Nishikawa, K. Henmi, SC. Park, T. Nadabe and N. Takeda, "Finite Element Analysis on the Impact Induced Damage of Composite Fan Blades Sbjected to a Bird Strike", Trans. Japan Soc. Aero. Space Sci., Vol. 54, No. 185/186, 2011, pp. 238-245.

51. 西川雅章, 逸見啓, パクサンチョル, 灘部岳晃, 武田展雄, "ファンエンジン複合材ブレードにおけるバードストライク損傷に関する有限要素解析", 日本航空宇宙学会論文集, Vol. 58, No. 680, 2010, pp. 261-268.

52. 西尾真由子, 武田展雄, "光ファイバひずみセンサを用いた変位同定法による境界条件変化を考慮した構造物の変形モニタリング", 土木学会論文集, Vol. 66, No. 2, 2010, pp. 229-238.

53. N. Nishikawa, K. Wakatsuki and N. Takeda, "Thermomechanical Experiment and Analysis on Shape Recovery Properties of Shape Memory Polymer Influenced by Fiber", Journal of Materials Science, Vol. 45, No. 14, 2010, pp. 3957-3960.

54. 水谷忠均, 武田展雄, "光ファイバセンサによる極低温でのひずみ計測技術とその航空宇宙分野における応用", 日本航空宇宙学会論文集, Vol. 58, No. 672, 2010, pp. 24-30.

55. M. Nishio, T. Muzutani and N. Takeda, "Structural Shape Reconstruction with Consideration of the Reliability of Distributed Strain Data from a Brillouin-Scattering-Based Optical Fiber Sensor", Smart Materials and Structures, Vol 19, 2010, 035011(14pages) (Most downloaded paper in 2010).

56. T. Okabe, M. Nishikawa and N. Takeda, "Micromechanics on the Rate-Dependent Fracture of Discontinuous Fiber-Reinforced Plastics", International Journal of Damage Mechanics, Vol. 19, 2010, pp. 339-360.

57. S. Minakuchi, H. Tsukamoto and N. Takeda, "Detecting Water Accumulation in Honeycomb Sandwich Structures by Optical-Fiber Based Distributed Temperature Measurement", Journal of Intelligent Material Systems and Structures, Vol. 20, 2009, pp. 2249-2255.

58. A. Yoshimura, T. Nakao and N. Takeda, "Improvement of Out-of-Plane Impact Damage Resistance of CFRP Due to Through-the-Thickness Stitching", Advanced Composite Materials, Vol. 18, 2009, pp. 121-134.

59. S. Minakuchi, Y. Okabe, T. Mizutani and N. Takeda, "Barely Visible Impact Damage Detection for Composite Sandwich Structures by Optical-Fiber-Based Distributed Strain Measurement", Smart Materials and Structures, Vol. 18, 2009, Paper No. 085018.

60. M. Nishikawa, T. Okabe and N. Takeda, "Effect of the Microstructure on the Fracture Mode of Short-FiberReinforced Plastic Composites", Journal of Solid Mechanics and Materials Engineering, Vol. 3, No. 8 2009, pp. 998-1009. (English Translation)

61. 西川雅章, 岡部朋永, 武田展雄, "短繊維強化プラスチックの破壊モードに及ぼす材料微視構造の影響", 日本機械学会論文集A編, Vol.75, No. 751, 2009, pp. 287-295.

62. M. Nishikawa, T. Okabe and N.Takeda, "Periodic-Cell Simulations for the Microscopic Damage and Strength Properties of Discontinuous Carbon Fiber-Reinforced Plastic Composites", Advanced Composite Materials, Volume 18, Nomber 1, 2009, pp. 77-93. (English Translation)

63. 西川雅章, 岡部朋永, 武田展雄, "一方向不連続CFRPの微視損傷形態と強度特性に関する周期セルシュミレーション", 日本複合材料学会誌, Vol. 35, No. 4, 2009, pp. 149-156.

64. S. Minakuchi, H. Tsukamoto, M. Mizutani, M. Nishio, Y. Okabe and N. Takeda, "Brillouin Spectral Response Depending on Strain Non-Uniformity within Centimeter Spatial Resolution and Its Application to Internal Damage Detection in Large-Scale Composite Structures", Structural Durability & Health Monitoring, Vol. 4, No. 4, 2008, pp. 199-219.

65. 西尾真由子, 水谷忠均, 武田展雄, "ブリルアン式高分解能分布型光ファイバひずみセンサを用いたCFRP構造の形状同定", 日本航空宇宙学会論文集, Vol. 56, No. 658, 2008, pp. 522-529.

66. S. Takeda, Y. Okabe and N. Takeda, "Monitoring of Delamination Growth in CFRP Laminates Using Chirped FBG Sensors", Journal of Intelligent Material Systems and Structures, Vol. 19, 2008, pp. 437-444.

67. A. Yoshimura, T. Nakao and N. Takeda, "Improvement of Out-of-Plane Impact Damage Resistance of CFRP Due to Through-the-Thickness Stitching", Advanced Composite Materials, Vol. 18, 2009, pp. 121-134. (English Translation)

68. 吉村彰記, 仲尾知晃, 武田展雄, "板厚方向の縫合によるCFRP積層板の面外衝撃損傷抑制効果", 日本複合材料学会誌, Vol. 34, No. 5, 2008, pp. 182-188.

69. M. Nishikawa, T. Okabe, N. Takeda and W. A. Curtin, "Micromechanics of the Fragmentation Process in Single-Fiber Composites", Modeling and Simulation in Materials Science and Engineering, Vol. 16, No. 5, 2008, Paper No. 055009.

70. T. Okabe, M. Nishikawa and N. Takeda, "Numerical Modeling of Progressive Damage in Fiber-Reinforced Plastic Cross-Ply Laminates", Composites Science and Technology, Vol. 68, No. 10-11, 2008, pp. 2282-2289.

71. M. Nishikawa, T. Okabe, K. Hemmi and N. Takeda, "Micromechanical Modeling of the Microbond Test to Quantify the Interfacial Properties in Fiber-Reinforced Composites", International Journal of Solids and Structures, Vol. 45, No. 14-15, 2008, pp. 4098-4113.

72. S. Yashiro, J. Takatsubo, N. Toyama, T. Okabe and N. Takeda, "Nondestructive Evaluation of Holed CFRP Laminates by a New Technique to Visualize Propagation of Ultrasonic Waves", Journal of Solid Mechanics and Materials Engineering, Vol. 2, No. 3, 2008, pp. 333-341.

73. M. Nishikawa, T. Okabe and N. Takeda, "Determination of Interface Properties from Experiments on the Fragmentation Process in Single-Fiber Composites", Materials Science and Engineering A, Vol. 480, No. 1-2, 2008, pp. 549-557.

74. A. Yoshimura, T. Nakao, S. Yashiro and N. Takeda, "Improvement on Out-of-Plane Impact Resistance of CFRP Laminates Due to Through-the-Thickness Stitching", Composites Part A, Vol. 39, 2008, pp. 1370-1379.

75. S. Takeda, T. Mizutani, T. Nishi, N. Uota, Y. Hirano, Y. Iwahori, Y. Nagao and N. Takeda, "Monitoring of a CFRP-Stiffened Panel Manufactured by VaRTM Using Fiber-Optic Sensors", Advanced Composite Materials, Vol. 17, 2008, pp. 125-137.

76. Y. Okabe, S. Minakuchi, N. Shiraishi, K.Murakami and N. Takeda, "Smart Honeycomb Sandwich Panaels With Damage Detection and Shape Recovery Functions", Advanced Composite Materials, Vol. 17, 2008, pp. 41-56.

77. 吉村彰記, 矢代茂樹, 武田展雄, "円孔を有する縫合CFRP積層板の損傷進展", 日本複合材料学会誌, Vol. 34, No. 1, 2008, pp. 14-20.

78. S. Minakuchi, Y. Okabe and N. Takeda, "Segment-Wise Model for Theoretical Simulation of Barely Visible Indentation Damage in Composite Sandwich Beams: Part II Experimental Verification and Discussion", Composites Part A, Vol. 38, 2007, pp. 2443-2450.

79. S. Minakuchi, Y. Okabe and N. Takeda, "Segment-Wise Model for Theoretical Simulation of Barely Visible Indentation Damage in Composite Sandwich Beams: Part I Formulation", Composites Part A, Vol. 39, 2008, pp. 133-144.

80. 西川雅章, 岡部朋永, 武田展雄, "結合力要素を用いた単繊維複合材料中の微視的損傷に関する有限要素解析", 日本複合材料学会誌, Vol. 33, No. 5, 2007, pp. 170-177.

81. F. Deng, T. Ogasawara and N. Takeda, "Tensile Properties at Different Temperature and Observation of Micro Deformation of Carbon Nanotubes-Poly(Ether Ether Ketone)", Composites Science and Technology, Vol. 67, 2007, pp. 2959-2964.

82. F. Deng, T. Ogasawara and N. Takeda, "Evaluating the Orientation and Dispersion of Carbon Nanotubes Inside Nanocomposites by a Focused-Ion-Beam Technique", Materials Letters, Vol. 61, 2007, pp. 5095-5097.

83. M. Nishikawa, T. Okabe and N. Takeda, "Numerical Simulation of Interlaminar Damage Propagation in CFRP Cross-Ply Laminates under Transverse Loading", International Journal of Solids and Structures, Vol. 44, 2007, pp. 3103-3113.

84. T. Okabe, K. Ishii, M. Nishikawa and N. Takeda, "Prediction of Tensile Strength of Unidirectional CFRP Composites", Advanced Composite Materials, Vol. 18, 2009, pp. 229-241 (English Translation)

85. 岡部朋永, 石井健介, 西川雅章, 武田展雄, "一方向CFRP複合材料の引張強度予測", 日本複合材料学会誌, Vol. 33, No. 6, 2007, pp. 205-212.

86. M. Amano, Y. Okabe, N. Takeda and T. Ozaki, "Structural Health Monitoring of an Advanced Grid Structure with Embedded Fiber Bragg Grating Sensors", Structural Health Monitoring, Vol. 6, No. 4, 2007, pp. 309-324.

87. A. Yoshimura, S. Yashiro, T. Okabe and N. Takeda, "Characterization of Tensile Damage Progress in Stitched CFRP Laminates", Advanced Composite Materials, Vol. 16, No. 3, 2007, pp. 223-244.

88. S. Yashiro, K. Murai, T. Okabe and N. Takeda, "Numerical Study for Identifying Damage in Open-Hole Composites with Embedded FBG Sensors and Its Application to Experimental Results", Advanced Composite Materials, Vol. 16, No. 2, 2007, pp. 115-134.

89. Y. Okabe, J. Kuwahara, K. Natori, N. Takeda, T. Ogisu, S. Kojima and S. Komatsuzaki, "Evaluation of Debonding Progress in Composite Bonded Structures Using Ultrasonic Waves Received in Fiber Bragg Grating Sensors", Smart Materials and Structures, Vol. 16, No. 4, 2007, pp. 1370-1378.

90. 高橋市弥, 武田真一,岩堀豊, 武田展雄, "スカーフ補修複合材の衝撃損傷特性の評価に関する研究", 材料, Vol. 56, No. 5, 2007, pp. 414-419.

91. S. Takeda, Y. Yamamoto, Y. Okabe and N. Takeda, "Debonding Monitoring of Composite Repair Patches Using Embedded Small-diameter FBG Sensors", Smart Materials and Structures, Vol. 16, 2007, 763-770.

92. 岡部洋二, 水口周, 白石伸夫, 村上賢, 武田展雄, "損傷検知・形状回復能力を有する知的ハニカムサンドイッチパネルの構築", 日本複合材料学会誌, Vol. 33, No. 1, 2007, pp. 30-37.

93. S. Minakuchi, Y. Okabe and N. Takeda, "Real-Time Detection of Debonding between Honeycomb Core and Facesheet Using a Small-Diameter FBG Sensor Embedded in Adhesive Layer", Journal of Sandwich Structures & Materials, Vol. 9, No. 1, 2007, pp. 9-33.

94. S. Takeda, Y. Aoki, T. Ishikawa, N. Takeda and H. Kikukawa, "Structural Health Monitoring of Composite Wing Structure During Durability Test", Composite Structures, Vol. 79, 2007, pp. 133-139.

95. S. Yashiro, T. Okabe and N. Takeda, "Damage Identification in a Holed CFRP Laminate Using a Chirped Fiber Bragg Grating Sensor", Composites Science and Technology, Vol. 67, 2007, pp. 286-295.

96. S. Yashiro, T. Okabe, N. Toyama and N. Takeda, "Monitoring Damage in Holed CFRP Laminates Using Embedded Chirped FBG Sensors", International Journal of Solids and Structures, Vol. 44, 2007, pp. 603-613

97. S. Yashiro and N. Takeda, "Inverse Analysis for Estimating Damage Patterns in Notched Composite Laminates Using an Embedded FBG Sensor", Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 3, 2007, pp. 310-321.

98. 矢代茂樹, 高坪純治, 遠山暢之, 岡部朋永, 武田展雄, "超音波伝ぱの可視化による有孔CFRP積層板中の層間はく離検出", 日本機械学会論文集A編, Vol.72, No. 724, 2006, pp. 1882-1887.

99. K. Goda, T. Okabe and N. Takeda, "A Strength Reliability Model of Unidirectional Fiber-Reinforced Ceramic Matrix Composites by Markov Process", Advanced Composite Materials, Vol. 15, No. 3, 2006, pp. 263-285.

100. T. Okabe, M. Nishikawa, N. Takeda and H. Sekine, "Effect of Matrix Hardening on the Tensile Strength of Alumina Fiber-Reinforced Aluminum Matrix Composites", Acta Materialia, Vol. 54, 2006, pp. 2557-2566.

101. T. Mizutani, N. Takeda and H. Takeya, "On-board Strain Measurement of a Cryogenic Composite Tank Mounted on a Reusable Rocket Using FBG Sensors", Structural Health Monitoring, Vol. 5, No. 3, 2006, pp. 205-214.

102. 矢代茂樹, 村井一恵, 岡部朋永, 武田展雄, "埋め込みFBGセンサを用いた有孔積層板の損傷同定に関する数値解析および実験結果への適用", 日本複合材料学会誌, Vol. 32, No. 3, 2006, pp. 208-217.

103. 吉村彰記, 矢代茂樹, 岡部朋永, 武田展雄, "縫合CFRP積層材の引張負荷下における損傷進展挙動", 日本複合材料学会誌, Vol. 32, No. 3, 2006, pp. 198-207.

104. 岡部朋永, 西川雅章, 武田展雄, "CFRP直交積層板における損傷進展を対象とした数値シュミレーション", 日本機械学会論文集, Vol. 72, No. 720, 2006, pp. 1254-1261.

105. 西川雅章, 岡部朋永, 武田展雄, "面外負荷を受けるCFRP直交積層板の層間はく離進展シュミレーション", 日本機械学会論文集, Vol. 72, No. 720, 2006, pp. 1246-1253.

106. T. Ogisu, M. Shimanuki, S. Kiyoshima, Y. Okabe and T. Takeda, "Feasibility Studies on Active Damage Detection for CFRP Aircraft Bonding Structures", Advanced Composite Materials, Vol.15, No. 2, 2006, pp. 153-173.

107. H. Sekine, S. Fujimoto, T. Okabe, N. Takeda and T. Yokobori, "Structural Health Monitoring of Cracked Aircraft Panels Repaired with Bonded Patches Using Fiber Bragg Grating Sensors", Applied Composite Materials, Vol. 7, 2006, pp. 87-98.

108. 岡部洋二, 水口周, 村上賢, 白石伸夫, 武田展雄, "CFRPサンドイッチパネルの衝撃損傷のSMA箔ハニカムコアによる修復", 実験力学, Vol.6, No. 2, 2006, pp. 152-158.

109. J. Noda, T. Okabe, N. Takeda and M. Shimizu, "Tensile Strength of CFRP Cross-Ply Laminates Containing Transverse Cracks", Advanced Composite Materials, Vol. 15, No. 1, 2006, pp. 81-93.

110. T. Ogisu, M. Shimanuki, S. Kiyoshima, J. Takaki, I. Taketa and N. Takeda, "Damage Behavior Analysis of Smart Composites with Embedded Pre-Strained SMA Foils", Smart Materials and Structures, Vol. 15, No. 1, 2006, pp. 41-50.

111. N. Takeda, S. Yashiro and T. Okabe, "Estimation of the Damage Patterns in Notched Laminates with Embedded FBG Sensors", Composites Science and Technology, Vol. 66, 2006, pp. 684-693.

112. 矢代茂樹, 武田展雄, "埋め込みFBG光ファイバセンサを用いたDFRP複合材積層板内の損傷形態推定手法の提案", 日本機械学会論文集(A編), Vol. 71, No. 706(2005-6), pp. 897-904.

113. S. Takeda, S. Minakuchi, Y. Okabe and N. Takeda, "Delamination Monitoring of Laminated Composites Subjected to Low-Velocity Impact Using Small-diameter FBG Sensors", Composites Part A, Vol. 36, 2005, pp. 903-908.

114. M. Amano, Y. Okabe and N. Takeda, "Evaluation of Crack Suppression Effect of TiNi SMA Foil Embedded in CFRP Cross-Ply Laminates with Embedded Small-Diameter FBG Sensor", JSME International Journal, Series A, Vol. 48, No. 4, 2005, pp.443-450.

115. N. Takeda, Y. Okabe, J. Kuwahara, S. Kojima and T. Ogisu, "Development of Smart Composite Structures with Small-Diameter Fiber Bragg Grating Sensors for Damage Detection: Quantitative Evaluation of Delamination Length in CFRP Laminates Using Lamb Wave Sensing", Composites Science and Technology, Vol. 65, 2005, pp. 2575-2587.

116. 野田淳二, 岡部朋永, 武田展雄, 清水真佐男, "[90/0]s GFRP直交積層材の損傷進展挙動", 日本複合材料学会誌, Vol.31, No. 3, 2005, pp. 112-119.

117. M. Amano, I. Taketa, M. Kobayashi, T. Ogisu, Y. Okabe and N. Takeda, "Evaluation of the Damage Suppression Effect of Ti-Ni Memory Alloy Foils Embedded in Carbon Fiber Reinforced Plastic Laminates", Advanced Composite Materials, Vol. 14, No. 1, 2005, pp. 43-61.

118. I. Taketa, M. Amano, M. Kobayashi, T. Ogisu, Y. Okabe and N. Takeda, "Modeling of Thermo-Mechanical Behavior of Ti-Ni Shape Memory Alloy Foils Embedded in Carbon Fiber Reinforced Plastic Laminates", Advanced Composite Materials, Vol. 14, No. 1, 2005, pp. 25-42.

119. 玉上久雄, 桑原淳一郎, 岡部朋永, 武田展雄, 小島正嗣, "FBG光ファイバセンサを用いたLamb波受振によるCFRP積層板中の剥離検出", 日本航空宇宙学会論文集, Vol.53, No. 615, 2005, pp. 166-173.

120. S. Yashiro, N. Takeda, T. Okabe, and H. Sekine, "A New Approach to Predicting Multiple Damage States in Composite Laminates with Embedded FBG Sensors", Composites Science and Technology, Vol. 65, 2005, pp. 659-667.

121. T. Okabe, H. Sekine, K. Ishii, M. Nishikawa, and N. Takeda, "Numerical Method for Failure Simulation of Unidirectional Fiber-Reinforced Composites with Spring Element Model", Composites Science and Technology, Vol. 65, 2005, pp. 921-923.

122. T. Ogisu, M. Shimanuki, S. Kiyoshima, and N. Takeda, "A Basic Study of CFRP Laminates with Embedded Prestrained SMA Foils for Aircraft Structures", Journal of Intelligent Material Systems and Structures, Vol. 16. No. 2, 2005, pp175-185.

123. 野田淳二, 岡部朋永, 武田展雄, 清水真佐男, "GFRP直交積層材中の損傷進展挙動", 日本機械学会論文集, Vol. 70, No. 698-A, 2004, pp. 1364-1369.

124. T. Tsutsui, A. Kawamata, T. Sanda, and N. Takeda, "Detection of Impact Damage of Stiffened Composite Panels Using Embedded Small-Diameter Optical Fibers", Smart Materials and Structures, Vol. 13. 2004, pp. 1284-1290.

125. T. Okabe, H. Sekine, J. Noda, M. Nishikawa, and T. Takeda, "Characterization of Tensile Damage and Strength in GFRP Cross-Ply Laminates", Materials Science & Engineering, Vol. A. No. 383, 2004, pp. 381-389.

126. 岡部洋二, 辻良平, 武田展雄, "FBGセンサを用いたCFRP積層板中の非軸対称熱残留ひずみの測定", 日本複合材料学会誌, Vol. 30, No. 5, 2004, pp. 199-206.

127. H. Tsutsui, A. Kawamata, J. Kimoto, A. Isoe, Y. Hirose, T. Sanda and N. Takeda, "Impact Damage Detection System Using Small-Diameter Optical-Fiber Sensors Embedded in CFRP Laminate Structures", Advanced Composite Materials, Vol. 13, No. 3, 2004, pp. 43-55.

128. T. Ogisu, M. Shimanuki, S. Kiyoshima, J. Takaki and N. Takeda, "Damage Suppression in CFRP Laminates Using Embedded Shape Memory Alloy Foils", Advanced Composite Materials, Vol. 13, No. 3, 2004, pp. 27-42.

129. T. Yari, K. Nagai and N. Takeda, "Aircraft Structural-Health Monitoring Using Optical Fiber Distributed BOTDR Sensors", Advanced Composite Materials, Vol. 13, No. 3, 2004, pp. 17-26.

130. N. Tajima, T. Sakurai, M. Sasajima, N. Takeda and T. Kishi, "Overview of the Japanese Smart Materials Demonstrator Program and Structure System Project", Advanced Composite Materials, Vol. 13, No. 3, 2004, pp. 3-15.

131. Y. Okabe, R. Tsuji and N. Takeda, "Application of Chirped Fiber Bragg Grating Sensors for Identification of Crack Locations in Composites", Composites Part A, Vol. 35, 2004, pp. 59-65.
(全321件)

総説
1. 浜本章, 武田展雄, "戦略的イノベーション創造プログラム(SIP) 航空機用樹脂・CFRP材料研究開発の概要", 日本複合材料学会誌, Vol. 44, No. 2, 2018, pp. 39-43.

2. 水谷 忠均, 武田 展雄, 岡崎 慎, 丸 祐介, 巳谷 真司, 水口 周, "宇宙工学分野における光ファイバセンシングの研究適用例", レーザー研究, 第 45 巻第 1 号 (2017 年 1 月), pp. 17-21.

3. 平野憲芳, 吉村涼介, 木元順一, 伊藤徹, 倉石晃, 武田展雄, 榎本清志, "複合材構造健全性診断技術開発 第5章 光ファイバセンサによる衝撃損傷検知システムの開発", 日本複合材料学会誌, Vol. 40, No. 3, 2014, pp. 89-97.

4. 齋藤望, 槍孝志, 熊谷芳宏, 松浦聡, 保立和夫, 岸眞人, 武田展雄, 榎本清志, "複合材料健全性診断技術開発 第4章 分布型光ファイバセンシングを用いた航空機構造健全性診断技術開発", 日本複合材料学会誌, Vol. 40, No. 2, 2014, pp. 47-54.

5. 高橋市弥, 関根一史, 久米将実, 竹谷元, 武田展雄, 水口周, 吉田幹夫, "複合材料健全性診断技術開発 第3章ライフサイクルを通じたストレインマッピングによる構造健全性診断技術の開発", 日本複合材料学会誌, Vol. 40, No. 1, 2014, pp. 3-9.

6. 副島英樹, 高橋孝平, 坂部敦彦, 岡部洋二, 武田展雄, "複合材構造健全性診断技術開発 第2章 超音波ラム波を用いた接着剥がれ診断技術開発", 日本複合材料学会誌, Vol. 39, No. 6, 2013, pp. 203-211.

7. S. Minakuchi and N. Takeda, "Recent Advancement in Optical Fiber Sensing for Aerospace Composite Structures", Photonic Sensors, Vol. 3, No. 4, 2013, pp. 345-354. (DOI:10.1007/s13320-013-0133-4).

8. 武田展雄, 吉田幹夫, "複合材構造健全性診断技術開発 第1章 複合材構造健全性診断技術(SHM) 開発プロジェクト", 日本複合材料学会誌, Vol. 39, No. 5, 2013, pp. 163-166.

9. 竹谷元, 高橋市弥, 水口周, 武田展雄, 榎本清志, "光ファイバセンサを用いた複合材料構造の健全性診断技術", 三菱電機技報, Vol. 87, No. 6, 2013, pp. 47-50.

10. 水口周, 武田展雄, "光ファイバセンサ -分布型センサ-", 強化プラスチックス, 第58巻, 第11号, 2012, pp. 377-381.

11. 武田展雄, 水口周, 伊藤悠策, "先端複合材構造の成形モデリングおよびモニタリングの最近の動向", 日本機械学会論文集(A編) , Vol. 78, No. 795, 2012, pp. 1495-1505.

12. 武田展雄, 水口周, "光ファイバセンサの航空機構造ヘルスモニタリング技術への適用", 計測と制御, Vol. 51, No. 3, 2012, pp. 234-240.

13. 武田展雄, 越岡康弘, "航空宇宙機の構造ヘルスモニタリング技術の進展", 非破壊検査, Vol. 60, No. 3, 2011, pp. 157-164.

14. 武田展雄, "光ファイバセンサー利用次世代航空機構造ヘルスモニタリング技術", O plus E (Optics + electronics) , Vol. 31, No. 9, 2009, pp. 1004-1008.

15. 武田展雄, "航空宇宙機の軽量化・高信頼性を支える複合材構造ヘルスモニタリング技術", 日本機械学会誌, Vol. 112, No. 1088, 2009, pp. 10-13.

16. N. Takeda, Y. Okabe and T. Mizutani, "Damage Detection in Composites Using Optical Fibre Sensors", Proc. IMechE Part G: J. Aerospace Engineering, Vol. 221, 2007, pp. 497-508.

17. 天野正太郎, 岡部洋二, 武田展雄, "次世代民間旅客機における構造ヘルスモニタリング技術の供給と役割", 検査技術, Vol. 12, No. 11, 2007, pp. 1-8.

18. 岡部洋二, 武田展雄, 荻巣敏充, 小島正嗣, "弾性波受信FBGセンサを用いたCFRP構造体中の剥離進展の評価", 検査技術, Vol. 12, No. 9, 2007, pp. 1-7.

19. N. Takeda, S. Minakuchi and Y. Okabe, "Smart Composite Sandwich Structures for Future Aerospace Application -Damage Detection and Suppression-: a Review", Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 1, 2007, pp. 3-17.

20. 岡部洋二, 武田展雄, "ファイバーグレーティング・センサ", よくわかる実験技術 学術用語, 2006, pp. 57-60.

21. 武田展雄, "構造ヘルスモニタリング", 日本航空宇宙学会誌, Vol. 54, No. 625, 2006, pp. 54.

22. N. Takeda, N. Tajima, T. Sakurai and T. Kishi, "Recent Advances in Composite Fuselage Demonstration Program for Damage and Health Monitoring in Japan", Structural Control and Health Monitoring, Vol. 12, 2005, pp. 245-255.

23. 武田展雄, 岡部洋二, "ファイバブラッググレーティング(FBG)センサを組み込んだスマート複合材料", レーザー研究,  「最近の光ファイバセンサ技術」特集号,  Vol. 33, No. 9, 2005, pp. 577-581.

24. N. Takeda and Y. Okabe, "Durability Analysis and Structural Health Management of Smart Composite Structures Using Small-Diameter Fiber Optic Sensors", Science and Engineering of Composite Materials, Vol. 12, No. 1-2, 2005, pp. 1-12.

25. 武田展雄, "構造ヘルスモニタリング技術の研究開発", 日本航空宇宙学会誌, Vol. 52, No. 605, 2004, pp. 142-148.

26. 岸輝雄, 武田展雄, 桜井建夫, 田島直之, 福田武人, 逢坂勝彦, 松崎雄嗣, 池田忠繁, 裘進浩, "NEDO「知的材料・構造システムの研究開発」プロジェクト経過概要報告", 日本複合材料学会誌, Vol. 30, No. 2, 2004, pp. 45-54.
(全56件)

基調講演
1. 武田展雄, "CFRPの整形モニタリング・モデリングと品質保証技術の実証", 2018年度JCOM若手シンポジウム, 2018年8月29日, 箱根町総合保険福祉センターさくら館 (基調講演).

2. N. Takeda, "Integrated In-Process Monitoring of High-Rate Production CFRP Structures for Material Quality Assurance", ASC 33rd Annual Technical Conference & 18th US-Japan Conference on Composite Materials, Sept. 24-26, 2018, Seattle, USA, Paper No. PL-B. (Plenary).

3. N. Takeda, "In-Process Monitoring of Advanced Composites for Material Quality Assurance", 11th Asian-Australasian Conference on Composite Materials (ACCM11), July 29-Aug. 1, 2018, Cairns, Australia, Paper No. PL-1.(Plenary).

4. N. Takeda, "In-Process Monitoring and Quality Assurance of Aerospace Composites", 18th European Conference on Composite Materials (ECCM18), June 25, 2018, Athens, Greece. (Keynote).

5. N. Takeda, S. Minakuchi, "Intelligent In-situ Process Monitoring and Quality Assessment of Aerospace Composite Structures", Proc. CAMX (The Composites and Advanced Materials Expo), Decem. 11-14, 2017, Orlando, USA. (Outstanding Technical Paper Award, CAMX2017) (基調講演).

6. 武田展雄, "航空機用複合材料の研究開発の最新動向", 第19回航空宇宙材料フォーラム, 日本航空宇宙学会, 2017年12月5日, JAXA調布航空宇宙センター(基調講演).

7. N. Takeda S. Minakuchi and A. Hamamoto, "Optical Fiber Sensor Based Quality Assurance of Aerospace Composites", 15th European-Japanese Symposium on Composite Materials, London, UK, Sept. 24-26, 2017.

8. N. Takeda, "Review of Aeronautical Fatigue Investigations in Japan during the Period June 2015 to May 2017", ICAF Conference 2017, International Committee on Aeronautical Fatigue, June 5-9, 2017, Nagoya, Japan. (Invited).

9. N. Takeda and S. Minakuchi, "Optical Fiber Sensor Based Life Cycle Monitoring and Quality Assessment of Carbon Fiber Reinforced Polymer Matrix Composite Structures," 25th Int. Conf. Optical Fiber Sensors (OFS-25), April 24-28, 2017, Jeju, Korea, Paper No. 10323-576 (招待講演).

10. N. Takeda and S. Minakuchi, "Optical Fiber Based Intelligent Process Monitoring and Modeling of CFRP Structures", Memorial Workshop on Composite Materials for Aircraft and Aero Space Engineering, April 13, 2017, UW-TU: AOS, University of Washington, Seattle, USA (招待講演).

11. N. Takeda, "Recent Development of “Innovative Aircraft Polymer Matrix Composites (iAPMC)” Project in SIP-SM4I Japan", UW-TU: AOS Memorial Symposium, April 13, 2017, University of Washington, Seattle, USA (基調講演).

12. 武田展雄, "次世代航空機CFRPの成形プロセスモニタリングと品質保証技術-SIP革新的構造材料プロジェクト樹脂・FRP領域の概要-", 日本化学会関東支部講演会 構造材料開発における自動車、航空機、鉄道の省エネ, 2016年9月16日, 日本化学会, (招待講演).

13. 武田展雄, "SIP革新的構造材料『航空機用樹脂・CFRP』航空機用高生産性革新CFRPの製造・品質保証技術の開発", 平成28年度未踏科学サマー道場<高性能FRPとしなやかタフポリマーによる材料革命>, 2016年8月17-19日, 東京大学フューチャーセンター (基調講演).

14. N. Takeda, "Adhesive Fracture and Birth of US-Japan Conference on Composite Materials: A Tribute to Professor Hroshi Fukuda", Prof. H. Fukuda Memorial Session, US-Japan Conference on Composite Materials, Aug. 1, 2016, Sapporo.

15. A. Hamamoto, S. Niwa, K. Takagaki, S. Minakuchi and N. Takeda, "Cure Process Simulation of Composites Based on In-situ Measurement of Internal Strain", Next Generation Transport Aircraft Workshop 2016, Feb. 25, Honolulu, USA. (Invited).

16. N. Takeda, "Development of High-Rate Production Innovative Aircraft PMC Products and Quality Assurance Technology", Next Generation Transport Aircraft Workshop 2016, Feb. 25, Honolulu, USA. (Keynote).

17. N. Takeda, "Life Cycle Monitoring and Quality Assessment of Advanced Polymer Matrix Composites", SIP-IMASH 2015 (1st Symposium on Innovative Measurement and Analysis for Sturctural Materials, Sept. 30, 2015, Tsukuba. (Invited).

18. 武田展雄, "航空機複合構造の更なる安全性と信頼性の向上を目指して〜先進複合材構造〜", 第5回次世代ものづくり基盤技術産業展 (TECH Biz EXPO), 名古屋, 2015年11月19日, 名古屋(基調講演).

19. N.Takeda and S. Minakuchi, "Intelligent Process Monitoring and Quality Assessment of CFRP Structures", SEAJCCM (SEA-Japan Conference on Composite Materials), Sept. 21-23, 2015, Singapore. (Plenary).

20. N. Takeda, "Optical Fiber Based Structural Health and Process Monitoring of Advanced Composite Structures", SPIE. Smart Structures NDE., March 9, 2015, San Diego, CA, USA. pp.9. (Plenary).

21. N. Takeda and S. Minakuchi, "Optical Fiber Based Structural Health and Process Monitoring of Composite Structures", ACCM 9 (Asian-Australasian Association for Composite Materials, Oct. 15-17, 2014, Suzhou, China. (Plenary).

22. S. Minakuchi and N. Takeda, "Optical Fiber Based Monitoring for Intelligent Quality Control of Composite Structures", 10th Canada-Japan Workshop on Composites, Aug.19-21, 2014, Vancouber, Canada. (Invited).

23. N. Takeda and S. Minakuchi, "Distributed Strain Monitoring of Composite Structures: Fabrication Process and Damage Progress", CDW-18(18th Composites Durability Workshop) Sept. 29-Oct. 1, 2013 Sendai. (Invited).

24. N. Takeda, "Review of Aeronautical Fatigue Investigations in Japan during the Period June 2011 to May 2013", ICAF Conference 2013, International Committee on Aeronautical Fatigue, June 6, 2013, Jerusalem, Israel, National Reviews CD-ROM 1-0830-Japan. (Invited)

25. 武田展雄, "先進複合材料の生産技術から生産科学への学術的貢献", 岐阜県工業会特別講演会「CFRP複合材料成形加工」, 岐阜, 2012年10月26日(特別講演).

26. N. Takeda, S. Minakuchi and T. Nadabe, "Damage Detection in CFRP Bolted Joints Using Embedded Optical Fiber Strain Distribution Monitoring", 23rd International Congress of Theoretical and Applied Mechanics (ICTAM), Aug. 23, 2012, Beijing, China, Paper No. SM08-020. (Invited)

27. N. Takeda, "Distributed Strain Assessment by Embedded Optical Fiber Sensing in Advanced Composite Structures", International Workshop on Naval Structural Life Assessment Methodologies, Aug. 14, 2012, Melbourne, Australia. (Keynote)

28. 武田展雄, "複合材料構造のライフサイクルモニタリング", 第55回材料強度と非破壊総合シンポジウム論文集, vol.55, 2012年3月27日, 東京. (招待講演)

29. 武田展雄, "先進CFRP構造のライフサイクルモニタリングの構築", 第3回日本複合材料合同会議(JCCM-3), 2012年3月8日, 京都. (Plenary)

30. N. Takeda, "Smart aircraft composite structures with embedded small-diameter optical fiber sensors", 3rd Asia Pacific Optical Sensors Conference (SPIE, USA), Jan.31-Feb.3, 2012, Sydney, Australia. (Invited)

31. N. Takeda, S. Minakuchi, T. Umehara and U. Ito, "Life Cycle Monitoring of Curved Composites Parts Using Embedded Fiber Bragg Grating Sensors", Proc. 12th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XX), Dec.15-18, 2011, Hong Kong, Advanced Materials Research, Vol. 410, 2012, pp. 18-21. (Plenary)

32. N. Takeda and S. Minakuchi, "Life Cycle Monitoring of Smart Composite Systems", The 12th Japanese-European Symposium on Composite Materials, August 20, 2011, Jeju Island, Korea. (Invited)

33. N. Takeda, "Optical Fiber Sensor Networks in Aerospace Composite Structures", November 8, 2011, Proc. of France-Japan Seminar (Energy Harvesting for Wireless Sensor Networks in Harsh Environment - Towards Infinite Autonomy) (Invited)

34. N. Takeda, "Review of Aeronautical Fatigue Investigations in Japan during the Period June 2009 to May 2011", ICAF Conference 2011, International Committee on Aeronautical Fatigue, May 30, 2011, Montreal, Canada, National Reviews CD-ROM pp. 1-55. (Invited)

35. N. Takeda, I. Takahashi and Y. Ito, "Visualization of Impact Damage in Composite Structures Using Pulsed Laser Scanning Method", Proc. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Cynamics and Materials Conference, April 10, 2010, Orlando, FL, USA, AIAA-2010-2529, 8p. (Invited)

36. 武田展雄, 水口周, "高分解能分布型光ファイバセンサを用いた複合材構造ヘルスモニタリング", (基調講演)日本実験力学学会 2009年度年次講演会, 2009年8月6日, 東京, pp. 140-144. (Plenary)

37. N. Takeda, "Damage Growth Prediction in Fiber Reinforced Composites and Structural Health Monitoring", RAMM & ASMP ‘09, 2009, June 1, Penang, Malaysia. (Plenary)

38. 武田展雄, "航空機複合材構造ヘルスモニタリング技術の現状と展望", 第7回保全セミナー, 2009年3月27日, 東京.(Invited)

39. N. Takeda, "Optical Fiber Based Structural Health Monitoring Technologies for Next-Generation Aerospace Composite Structures", Graduate Seminar, 2009, March 9, University of Washington, Seattle, USA. (invited)

40. 武田展雄, "航空・宇宙分野における構造ヘルスモニタリングの新展開", 東京大学グローバルCOE「セキュアライフ・エレクトロニクス」シンポジウム, 2009年1月20日, 東京. (Invited)

41. 武田展雄, "航空宇宙用CFRPサンドイッチ構造の構造健全性モニタリング技術について", 日本複合材料学会西部支部講演会, 2009年1月9日, 九州.(Plenary)

42. N. Takeda, "Recent Development of Structural Health Monitoring Technologies for Aircraft Composite Structures Society", Seminar at Australian Composite Structures Society, 2008, December 1, Melbourne, Australia. (Invited)

43. 武田展雄, "高分解能分布型光ファイバーセンサシステムを用いた複合材構造の構造健全性評価", 日本複合材料学会関西支部研究検討会, 2008年11月21日, 京都. (Plenary)

44. 武田展雄, "航空宇宙用CFRPサンドイッチ構造の構造健全性モニタリング技術について", 日本複合材料学会東北北海道支部講演会, 2008年11月18日, 仙台.(Plenary)

45. N. Takeda, "Impact Damage Detection Scheme of CFRP Sandwich Structures Based on Optical Fiber Based Distributed Strain Measurement", Proc. of Tri-University Workshop on Aero-Structural Mechanics & Aerospace Engineering (NASPC/TUWMAE2008), 2008, October 31-November 2, Beijing, China. (Invited)

46. 武田展雄, "航空宇宙複合材料構造の発展をヘルスモニタリング技術の現状と展望", 第50回構造強度に関する講演会, 北九州, 2008年7月30日-8月1日, pp. 1-4. (Plenary)

47. N. Takeda and S. Minakuchi, "Structural Health Monitoring of CFRP Sandwich Structures by Optical Fiber Based Distributed Strain Measurement", Proc. of The 6th Asia-Australasian Conference on Composite Materials(ACCM-6), 2008, September 23-26, Kumamoto, pp. 13. (Invited)

48. N. Takeda, "Recent Development of Structural Health Monitoring Technologies for Aircraft Composite Structures", 26th Congress of the International Council of the Aeronautical Sciences (ICAS 2008), 2008, September 14-19, Anchorage, Alaska, USA. (Plenary)

49. N. Takeda, (Featured Lecture) "Research on Multifunctional Materials & Structural Health Monitoring in Japan", SAMPE Fall Technical Conference and Exhibition, 2008, September 8-11, Memphis, Tennessee, USA. (Plenary)

50. N. Takeda, "Special International Panel Discussion (Invited Panelist), Proc. of 49th AIAA/ASME/ASCE/AHS/ASC Structures", Structural Dynamics and Materials Conference, 2008, April 7-10, Schaumburg, Illinois, USA. (Invited)

51. N. Takeda, "Fiber Optic Sensor-Based SHM Technologies for Aerospace Applications in Japan", 5th International Symposium on SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, March 2008. (Keynote)

52. N. Takeda, "Optical fiber sensor based structural health monitoring of aerospace composite structures", 4th International Conference on Fatigue of Composites, VW, Kaiserslautern, Germany, Sept. 26-28, 2007. (invited)

53. N. Takeda, "Recent Developments of Optical Fiber Sensor Based SHM Technologies for Aerospace Composite Structures in Japan", 6th International Workshop on Structural Health Monitoring, Stanford University, Sept. 11-13, 2007. (Plenary)

54. N. Takeda, "Optical Fiber-Based structural Health Monitoring of Advanced Composites Structures", SNU-UT Joint Workshop on Smart Structures and Structural Health Monitoring, Seoul, 2007. (Plenary)

55. 武田展雄, "先進複合材料の構造健全性診断技術の現状と将来", 第38回応力・ひずみ測定と強度評価のシンポジウム, 東京, 2007. (Plenary)

56. N. Takeda, Y. Okabe, J. Kuwahara, T. Ogisu and S. Kojima, "Damage Detection in CFRP Bonded Structures by Using Fiber Bragg Grating Sensors as Ultrasonic Wave Receivers", 5th Asian-Australasian Conference on Composite Materials (ACCM-5), Hong Kong, 2007, pp. 1037-1040. (Invited)

57. N. Takeda, "Recent Development of Structural Health Monitoring of Aerospace Composite Structures", 2006 KSAS-JSASS Joint International Symposium on Aerospace Engineering, Busan, 2006, pp. 2.

58. N. Takeda, "Recent Progress of Structural Health Monitoring of Advanced Aerospace Composite Structures in Japan", International Symposium on Structural Reliability in Energy Systems Innovation, Tokyo, 2006 Nov. 22, pp. 73-84.

59. N. Takeda, "Towards Damage and Structural Health Monitoring of Aerospace Composite Structure Using Optical Fiber Sensors", The Third European Workshop on Structural Health Monitoring, Granada, 2006 July 5-7, pp. 34-35.

60. 武田展雄, "埋め込み光ファイバセンサを用いた航空宇宙複合材構造のヘルスモニタリング", 第37回光波センシング技術研究会, 東京, 2006, pp. 13-18.

61. S. Yashiro, T. Okabe and N. Takeda, "Damage Identification in a Holed CFRP Laminate Using a Chirped Fiber Bragg Grating Sensor", International Workshop on Fracture of Materials: Moving Forwards, Sydney, 2006, pp. 46-47.

62. N. Takeda, Y. Okabe and T. Mizutani, "Damage and Structural Health Monitoring of Composite Structures Using Optical Fiber Sensors", The 9th Japan International SAMPE Symposium & Exhibition (JISSE-9), Tokyo, 2005, Paper No. S7-05.

63. 武田展雄, "宇宙航空用スマート複合材料構造のためのヘルスモニタリング技術", 日本機械学会2005年度年次大会, 東京, 9月19日−22日, pp. 534-535.

64. N. Takeda, M. Amano, I. Takahashi, Y. Okabe, H. Takeya and T. Ozaki, "Damage Identification in Composite Grid Structures Using Fiber Bragg Grating Sensor", II ECCOMAS Thematic Conference on Smart Structure and Materials, Lisbon, July 18-21.

65. N. Takeda, N. Tajima and T. Sakurai, "Structural Health Monitoring Technology in Japanese Composite Fuselage Demonstrator", International Conference on Aeronautical Fatigue 2005, Hamburg, June 6-10.

66. N. Takeda, "Optical Fiber Sensors for Structural Health Monitoring", Japan-US Workshop on the Future of Sensors and Sensor Systems, Tsukuba, 2005, February 28-March 2, pp. 38.

67. 武田展雄, "航空宇宙分野におけるスマート複合材料システムの現状と今後", 繊維学会, 東京, 2004, 6月9日-11日, pp. 219-222.

68. N. Takeda, T. Okabe and S. Yashiro, "Damage Identification in CFRP Laminates with Embedded Optical Sensors -Inverse Analysis of Reflection Spectra from FBG Sensors-", The 9th European-Japanese Symposium on Composite Materials, Hamburg, Germany, 2004, May 25-28.

69. N. Takeda and Y. Okabe, "Durability Analysis and Structural Health Management of Smart Composite Structures Using Small-Diameter Fiber Optic Sensors", 6th International Conference on Durability Analysis of Composite Systems, Riga, Latvia, 2004, May 12-15.

70. 武田展雄, "NEDO知的構造材料システムプロジェクトにおける損傷検知・抑制デモンストレータ試験", NEDO知的構造材料システムプロジェクトにおける損傷検知・抑制デモンストレータ試験, 新潟, 2004, May 12-15

71. 武田展雄, "Towards Practical Health Monitoring Management of Aerospace Smart Composite Structures", 韓国複合材料学会, 浦項, 韓国, 2004, April 8-10.
(全77件)

武田展雄教授 受賞
1. N. Takeda and S. Minakuchi, "Intelligent In-Situ Process Monitorig and Quality Assesment of Aerospace Composite Structures", CAMX (The Composites and Advanced Materials Expo) 2017, Outstanding Technical Paper Award, オーランド, フロリダにて受賞, 2017.12.14.

2. N. Takeda, "SAMPE Fellow Award", オーランド, フロリダにて受賞, SAMPE (Society for the Advancement of Materials and Process Engineering), 2017.12.11.

3. 武田展雄,"様々な研究活動を通じて極めて顕著な功績",先端材料技術協会 (SAMPE Japan) 協会特別賞,2014.7.24.

4. N. Takeda, "NDE Lifetime Achievement Award", SPIE Smart Structures/NDE 2014 (非破壊評価・生涯功績賞)米国, サンディエゴにて受賞, 2014.3.11.

5. 武田展雄, "日本航空宇宙学会フェロー" 認定番号00037, 2013.4.19.

6. 武田展雄, "過去3回に亘るシンポジウム委員長としての多大なる功績", 先端材料技術協会(SAMPE Japan)功績賞, 2012.7.24.

7. I. Takahashi, K. Sekine, M. Kume, H. Takeya, Y. Iwahori, S. Minakuchi, N. Takeda and K. Enomoto, "Damage Detection of Composite Structures by Life-Cycle Strain Mapping Using FBG Sensors", SAMPE Tech. 2011, Outstanding Paper Award Third Place.

8. I. Takahashi, K. Sekine, H. Takeya, Y. Iwahori, S. Minakuchi, N. Takeda and Y. Koshioka, "Life Cycle Strain Mapping of Composite Airframe Structures for Health Monitoring by Using FBG Sensors", SAMPE Tech. 2010, Outstanding Paper Award Second Place.

9. N. Takeda, "2010 Person of the Year", Stuructural Health Monitoring: An International Journal (構造ヘルスモニタリング国際年間最優秀個人賞)イタリア, ソレントにて受賞.

10. 武田展雄, 日本複合材料学会フェロー, 2010年5月25日 (FELLOW of The Japan Society for Composite Materials).

11. 西川雅章, 岡部朋永, 武田展雄, "短繊維強化プラスチックの破壊モードに及ぼす材料微視構造の影響", 2009年度日本機械学会賞(論文)(日本機械学会論文集A編2009年3月号, Vol.75, No. 751, pp. 287-295).

12. 岡部朋永, 石井謙介, 西川雅章, 武田展雄, "一方向CFRP複合材料の引張強度予測",  日本複合材料学会2008年度論文賞, 2009.5.18.

13. 矢代茂樹, 村井一恵, 岡部朋永, 武田展雄, "埋め込みFBGセンサを用いた有孔積層板の損傷同定に関する数値解析および実験結果への適用", 日本複合材料学会2006年度論文賞, 2007.5.20.

14. 武田展雄, "計測工学への貢献", Institute of Physics(英国) Fellow, 2006.

15. 武田展雄, "先端材料技術分野と協会への多大な貢献", 先端材料技術協会(SAMPE Japan)功績賞, 2004.7.27.

16. 遠山暢之, 岡部朋永, 高坪純治, 武田展雄, "ラム波伝播速度変化を利用した繊維強化プラスチックにおけるトランスバースクラックの定量モニタリング及び位置評定制精度向上", 平成15年度日本非破壊検査協会論文賞.

17. 田島直之, 武田展雄, 他4名, "複合材航空機胴体模擬構造を用いたデモンストレータ試験による損傷検知・損傷抑制及び騒音・振動低減技術の実証", 日本複合材料学会2003年度技術賞, 2004. 5.24.

18. 野田淳二, 岡部朋永, 武田展雄, 清水真佐男, "トランスバースクラックを有するCFRP直交積層板の引張強度", 日本複合材料学会2003年度論文賞, 2004.5.24.

19. 武田展雄, "複合材料界面の力学評価における顕著な貢献", 平成15年度複合材料界面研究会金原記念賞, 2004.4.22.

20. 武田展雄, "機械工学への貢献", 日本機械学会フェロー, 2004.3.

21. 遠山暢之, 岡部朋永, 高坪純治, 武田展雄, "ラム波伝播速度変化を利用した繊維強化プラスチックにあけるトランスバースクラックの定量モニタリングおよび位置標定精度向上", 平成15年度非破壊検査協会論文賞, 2004.3.
(全26件)

武田研究室メンバー 受賞(最近のもの)
1. 加藤佳樹, 水口周, 萩原慎二, 武田展雄, "多重板厚方向流路を用いた自己修復炭素繊維複合材料", 第43回複合材料シンポジウム 優秀学生賞, 2018.9.

2. 久田深作, 水口周, 武田展雄, "繊維強化型クラックアレスタを用いた複合材T-jointの損傷許容性向上", 第60回構造強度に関する講演会 若手奨励賞, 2018.8.

3. 久田深作, 水口周, 高垣和規, 武田展雄, "High-performance T-joint Using Asymmetric Stacking Sequence and Atypical Deltoid Structure" (SAMPE Journal), SAMPE Japan 論文賞, 2018.7.

4. 澤口慶一朗, 水口周, 武田展雄, "層間樹脂層がL型CFRPの残留変形に与える影響", 第9回日本複合材料合同会議 最優秀講演賞, 2018.3.

5. 水口周, ICAF2017 Jaap Schijve Award, 2017.6.

6. 久田深作, 高垣和規, 水口周, 武田展雄, "High-Performance T-joint using Asymmetric Laminate Design and Atypical Deltoid Structure", SAMPE Seattle 2017 Outstanding Technical Paper Award Second Place, 2017.5.

7. 久田深作, 高垣和規, 水口周, 武田展雄, "特徴的な積層構成及びデルトイド構造を用いた高機能T-joint", 第8回日本複合材料合同会議 優秀講演賞, 2017.3.

8. 浜本章,日本複合材料学会 学会賞(功労賞),2016.6.

9. 丹羽翔麻,高垣和規,水口周,武田展雄,"層間樹脂層を有するCFRP積層板の成形時硬化収縮モニタリングおよび成形解析",日本複合材料学会 学会賞(論文賞),2016.6.

10. 束田拓平,丹羽翔麻, 水口周,武田展雄, "厚板熱可塑性CFRPの成形モニタリングに基づく成形時残留応力解析", 第7回日本複合材料合同会議 優秀講演賞, 2016.3.

11. 久田深作,高垣和規,水口周,武田展雄,"Cure Cycle Optimization of Out-of-Autoclave Composites using Fiber-Optic-Based Strain Sensors",JISSE-14 Student presentation award,2015.12.

12. 高垣和規,久田深作,水口周,武田展雄,"残留ひずみ計測に基づくVacuum Bag Only成形の高品質化",第57回構造強度に関する講演会 若手奨励賞,2015.8.

13. 水口周, 宇平圭吾,寺田愉考,武田展雄,齋藤望,清水隆之, "Quality Control of Composite Bonded Joints using Fiber-Optic-Based Process Monitoring" (SAMPE Journal),SAMPE Japan 論文賞,2015.7.

14. 高垣和規,水口周,武田展雄,"Development of Crack-Free Thick CFRP Pipe using Novel Residual Stress Reduction Method" (CAMX 2014), SAMPE Japan 論文賞,2015.7.

15. 丹羽翔麻,高垣和規, 水口周,武田展雄, "内部ひずみその場計測に基づく高精度複合材成形シュミレーション", 第6回日本複合材料合同会議 優秀講演賞, 2015.3.

16. 丹羽翔麻,高垣和規, 水口周,武田展雄,"内部ひずみ計測に基づく高精度複合材成形解析", 第39回複合材料シンポジウム 優秀学生賞, 2014.9.

17. 平野滝子,"協賛行事の運営および国際会議JISSE企画におけるきわめて顕著な貢献",SAMPE Japan 感謝状(協会初),2014.7.

18. 宇平圭吾,水口周,武田展雄,"Fiber-Optic-Based Pressure Detection and Quality Assurance of CFRP Secondary Bonding" (JISSE 13), SAMPE Japan 論文賞,2014.7

19. 高垣和規, 水口周, 武田展雄, "衛星構造用厚肉CFRPパイプのライフサイクルモニタリング", 第4回日本複合材料合同会議 優秀講演賞, 2013.3.

20. 津田皓正, 小笠原俊夫, 文淑英, 仲本兼悟, 島村佳伸, 井上翼, 武田展雄, "一方向配向 Aligned CNT sheet 含有複合材料の破壊進展に関する実験的評価", 第4回日本複合材料合同会議 優秀講演賞, 2013.3.

21. 津田皓正, 小笠原俊夫, 吉村彰記, 武田展雄, "カーボンナノチューブ含有複合材料の変形・界面強度測定とそのモデル化", 第35回複合材料シンポジウム 優秀学生賞, 2010.10.